Filter
Top Products
After switching on the power, the washing machine will set to common program including"wash, rinse,
spin "automatically. To select other procedures, push the "soak", " wash", " rinse" or "spin" button
to select the time of soak, wash and spin, and the times of rinse. After switching on the power, if you
push one of the button among "wash", "rinse"and"spin", the digitron of the former procedures will
turn off automatically. The former procedures will not run. For instance: after switching on the power. If
you push the "spin" button first, it will execute spin singly after starting.
Attention
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
When high water level is selected, the pulsator will rotate
discontinuously when the water level reaches 1.
The soak procedure can work in cooperation with automatic programs like common, jeans, gentle and
cotton. There is intermittent pulsator stirring during soak.
WATER LEVEL
5.Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect the
cloth. After defection, it can set the water level automatically. To select other water level, first push the
"start/pause" button, then push the "water level" button to set the water level. Refer to "water level button"
in page 11 for selection.
Page 11
13