Filter
Top Products
8
1 Preparation before washing
Confirm if there's
special requirement
for the laundries.
Clear the pocket.
Take out the coins ,
sand, hairpins etc.
Fasten the buttons
and zippers.
When the pulsator is
running ,the buttons of
the laundries may cause
noise. For the sake of
discretion ,please put
the laundries with
buttons into other
laundries.
Preparation before washing
The quantity of the
laundries shall not
exceed the rated
value. The big
laundries like the
jeans shall be put
in loosely.
Pay attention to followings before washing the laundries
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
a. Check if the laundries are applicable for washing with machine.
B. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
please apply detergent in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
f. Do not put those laundries polluted by chemicals directly into the washing machine.
The capacity of washing of the machine refer to the largest weight of the standard laundries under dry
condition that can be washed in one time.
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can be turned round in washing for one time washing.
Do not select high water level for small quantity of laundries ,so as to avoid splashing of water.
2 The musts in washing
4.The ground inclination or unevenness may cause
the washer operating not steadily or cause noise,
please set level the washer.
It is suggested to use foamless washing powder.