Filter
Top Products
After switching on the power, the washing machine will set to common
program including"wash, rinse,spin "automatically. To select other
procedures, push the "SOAK", " WASH", " RINSE" or "SPIN" button
to select the time of soak, wash and spin, and the times of rinse. After
switching on the power, if you push one of the button among "WASH",
"RINSE"and"SPIN", the digitron of the former procedures will turn off
automatically. The former procedures will not run. For instance: after
switching on the power. If you push the "SPIN"button first, it will execute
spin singly after starting.
Attention
Even there's no water in the tub, a certain period is
required before spin starting.
Do not use the soak program for the woolen textiles.
Separate the laundries that are not colorfast from
other laundries in washing.
The pulsator will not rotate unless the water is
filled to"3" water level.
The soak procedure can work in cooperation with automatic programs like standard, jeans,
fiber and cotton. There is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during
washing, and can not make setting in other cases.
WATER
LEVEL
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to
detect the cloth. After defection, it can set the water level automatically. To select other water
level, first push the "START/PAUSE"button, then push the "WATER LEVEL" button to set the
water level. Refer to "water level button"in Page 11 for selection.
Page 11