Filter
Top Products
POWER ON/OFF button
Push the ON/OFF button to switch
on the power.
When the power is on, push it
again to switch off the power.
Push the ON/OFF button to switch
on the power.
If the START/PAUSE button is not
pushed, the washing machine will
automatically switch off the power
after 5 minutes.
RESERVE/CALEFACTION
WATER LEVEL
Time remained
(minutes)
Reserve
(hours later)
10
8
6
4
2
9
7
5
3
1
CHILD LOCK FUNCTION
Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF
button. The digitron displays CL . You can continue setting desired washing procedures.
After setting, push down the START/PAUSE button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the WATER LEVEL and SPIN button at the same
time for more than 1 second. After a beep sound, the child lock function is released.
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in
hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds 99 minutes, it adopts A at tens place to
represent 100 minutes, b to represent 110 minutes. For instance, A3
represents 103 minutes.
In case of abnormal phenomenon, it displays
the abnormal symbol (see to Page 16)
Page16
RESERVE/REMAIN time indicator digitron
WATER LEVEL butto
n
The washing machine can detect the laundries automatically.
After detection, it will set the water level to suitable value among 4, 6,
8, and 10 automatically.
You can also set water level by yourself. After the machine is started,
it will not set water level automatically. You shall push the
start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
If wet laundries are put in, it may display water level 10 . You must
set suitable water level by yourself.
If POSTHASTE programs selected, it will display water level 3 .
When water level 2 is reached in water filling, it will perform
washing while filling water. When water level 3 is reached, it will
change to normal washing.
During operation of wash and rinse program, you can push down
the water level button to add water. When you release the button, or
it reaches the overflow water level, the machine will stop adding
water.
S
TART/PAU
SE button
After the power is switched on, push it to Start the machine
During working, push it to pause working.
During pause, push it to resume working.
PROGRAM
STANDARD
QUICK
POSTHASTE
JEAN
FIBER
COTTON
WOOLLEN
SILK
PROGRAM se
lection button
Following automatic programs are available for selection
Applicable situation
Common washing
Washing the relatively big and thick laundries
Washing the chemical fiber laundries
Washing the cotton textiles
Washing the woolen textiles
Washing the textile
Quick and high-efficiency wash for
common
POWER
ON/OFF
START
PAUSE
PROGRAM
FIBER
COTTON
WOOLLEN
SILK
STANDARD
QUICK
POSTHASTE
JEAN
Super quick wash of the laundry under 1 kg
with light soil
"RESERVATION/CALEFACTION" button
Heating function can be selected if keep pressing
"RESERVATION/CALEFACTION"Button for more than 2 s.
If the decimal point of digitron is lighted, it means heating
function is selected. The initial temperature is about 30 ,
and you can select your desired value in a switching
sequence 30 40 off 20 . If keep pressing the
"RESERVATION/CALEFACTION" button for more than 2 s
again, the temperature indicator turns off, and the
Reservation can be selected , you can select reserved time.
After the machine starts running, if selection or cancellation
of heating function is desired, you should switch off the power
and reselect.
During machine running, the digitron indicates the cycle
remaining time in minutes). Press "
"button, the digitron will Indicate the
remaining reserved time to cycle end (in hours).The digitron
will indicate the running state of the machine.
RESERVATION
/CALEFACTION
Press " "button to set
reservation or heating Function.
RESERVATION/CALEFACTION