Haier SIG100-97 Washer User Manual


 
13
8. Press the button of Cycle Signal , which will
accordingly remind you of the cycle completion.
Confirming a reserved program
Page 9
Cycle
Signal
After the power is switched on, the washing machine will automatically set
at Softer . The user himself could also set three warning volumes Louder,
Softer or Off for the completion of a cycle. Refer to Cycle Signal
on page 9 to select.
9 Press the button of Delay/Start to select a suitable
reserve wash program
Delay
Start
After switching on, the washing machine reserved wash program will be
automatically set inactive. If you desire a wash cycle to end at a reserved
time, you can press the Delay/Start button to set a reserved wash program.
Refer to The button of 'Delay/Start' on page 8.
Page 8
When delay starts, program selected indicator turns off, while
the delay Indicator and remaining time turn on. During
reservation period, pressing Delay/Start button could
get reservation conditions displayed.
The wash cycle will end after 18 hrs
10. Press the Start/Pause button
Start
Pause
Press this button when you want the machine to start running.
During machine running, press this button to pause and press once again to
resume operation.