Haier SIG100-97 Washer User Manual


 
8
Fabric
conditioner
Explanation of Buttons
Indicator mode and meaning
The indicator is off, indicating that the
program or mode is not selected
The indicator is on, indicating the program
or mode selected and about to run
Heavy
Duty
For setting, changing water level and manually
replenishing water. Water levels may be set at
beginning or pause.
Speed wash/spin button
Soil level button
Cycles button
Select following six automatic programs
with the button
Delay/Start button
During no delay, the Delay/ Start indicator is
off, the remaining time indicator is on, and
the nixie indicator displays the non-delayed
cycle remaining time.
Whites
Normal/Fast
Normal/Slow
Delicate/Fast
Delicate/Slow
Speed
Stain Wash
Heavy
Normal
Light
Load Size
Soil Level
Time Remaining
Cycles
Normal
Heavy Duty
Whites
Program
Washing the bigger, thicker or
heavier dirty laundries
Normal Common washing
Quick
wash
Quick washing of the light dirt
laundries
Delicate
Casual
Washing the woollen textile
or underwear
Hand
Wash
To imitate hand scrub
washing effect
Washing the cotton textile
Pushing the button to select the reserve washing
time from 2 hour to 24 hour.
During Soak, Wash or Rinse, press this button
to manually replenish water and release it to
stop. But this function is disabled when water
reaches overflow protection level.
Wash/spin
For selecting clothes soiled degree.
Wash cycle increases 2 minutes for a
next higher soiled degree and decreases
2 minutes for a next lower soiled degree.
Push the button to select the spinning speed
S when program is
normal or delicate casual.
elect the spinning speed
Usage of the Operation Buttons
Time On
Delay
Start
Flashing Normal running mode