Filter
Top Products
4 Use the operation buttons
Connection between the water inlet hose and the washer
1.Do not take off the water absorption cushion. Please check if the
cushion is dropped or damaged before each usage. If it happens
please contact our after-sale department immediately.
2 Put the nut of the water inlet hose on the valve jointer.
3 Fasten the nut. Swing it gently to confirm if it's suitable.
nut of the water
inlet hose
jointer of the
water inlet valve
water absorption
cushion.
Connection between the jointer of the water inlet hose and the water inlet hose
1.Push down the slider. Insert the water inlet hose into the jointer.
2 Hang the lock lever to the jointer. Release the slider till a click
sound is heard.
Locking level
the jointer of the
water inlet hose
Slider
Check the connection between the jointer of the water inlet hose
and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the jointer of the water inlet hose and the
water faucet, and the installation of the water inlet
hose are firm, so as to prevent dropping from
improper installation position.
Dismantle the water inlet hose
1. Close the water faucet.
2. Press the locking lever. Push down the slider. Then pull of the water inlet
hose.
If the machine is used frequently, the jointer of the water inlet hose can be
kept
on the faucet to prevent damaging the fixing screw.
Locking level
Slider
WASH
SOAK
RINSE
SPIN
CHILD
QUICK
COTTON
POWER
ON/OFF
S
T
AR
T
P
AUS
E
WATER
LEVEL
PROGRAM
SELF-PROGRAM
STANDARD
RESERVE(HOURS)
REMAIN(MINUTES)
W
A
S
H
R
E
S
E
R
V
E
S
O
A
K
R
I
N
S
E
S
P
I
N
(H)
(M
(M)
(T)
(M)
MEMORY
HEAVY
WOOL
TUB DRY
66L
57L
46L
34L
18L
70L
62L
52L
40L
26L
PROCESS
The light is off
Flashing: indicate the running program or indicate the water level
On: indicate the program about to run, or indicate the selected mode or indicate the water level
Mode and meaning of the indicators
Push the "POWER ON/OFF"button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "POWER ON/OFF" button to switch on the power. If the "START/PAUSE"button is not pushed, the
machine will switch off the power automatically after 5 minutes.
1 "POWER ON/OFF"button
STANDARD
Program
COTTON
Washing the cotton textiles
Washing the normal laundries
GENTLE
Washing the woolen textiles or underwear
Applicable situation
WOOL
Washing the woollen textiles
HEAVY Washing the bigger and heavier lanudries
Drying the inner tub and the outer tub, which can avoid growing mildew.(after washing
clothes,there is dampness between the inner tub and the outer tub, the wall of the inner tub
and out tub can breed mildew, where you can choose thetub dry program, Drying the inner
tub and the outer tub, keeping the inner tub and outer tub dry, which can avoid growing mildew.
TUB DRY
BLANKET
Washing the blanket
QUICK
Quick waching of the light dirt laundries
2 "PROGRAM"button
POWER
ON/OFF
PROGRAM