Haier HLP23E Washer/Dryer User Manual


 
English
8
Selecting the Wash Cycle
Press the "Program Select" button for your desired wash cycle. Choose between
6 options.
The total time includes the normal water inlet time and drain time. The total
washing time may be affected by the water inlet pressure and water level.
The spin time is the time from the intermittent running to the finishing of the
cycle.
In the "Heavy" program, the first soak is approximately 20 minutes,
pre-wash is approximately 8 minutes. Clothes are soaked again for
approximately 5 minutes. The washing, rinsing and spinning will then be
completed. The wash time includes the pre-wash time.
• In the "Quick Wash" program select wash, rinse and spin are set automatically.
No procedure can be selected after setting.
Note: When you turn the power ON, the machine will set the standard wash
program to the wash/rinse/spin position.
Selecting the Water Level
There are 4 water levels to chose from: Very Low, Low, Medium and High. Your
selection may depend on your wash load.
Note: Incoming hot water must not exceed 122˚F/50˚C.