Haier HLP23E Washer/Dryer User Manual


 
English
12
Installation Instructions
Read carefully and understand all installation instructions before installing this
washing machine. If after completing the process you are still unsure whether
the washer has been properly installed, we recommend that you contact a quali-
fied installer.
Tools and Materials Required
You will need to use the following tools when installing your washer:
Scissors
Phillips Screwdriver
Flathead Screwdriver
Pliers
Wrench
Tape Measure
Gloves
Level
Installing the Bottom Panel
The bottom panel blocks noises to provide you with the quietest performance
possible during the wash cycle operation.
1. First, lay down the washer on its front side.
2. Place the panel against the bottom of the machine. Align the holes in the
panel with the holes in the washer.
3. Insert the screws through the holes of the panel into the bottom of the washer
and tighten. (7 screws are supplied)
4. Once all screws have been installed and the panel is in place, return the
washer to its standing position.
Note: During this time, you may reroute the drain hose to the left or right
side for draining.