Filter
Top Products
English | 19
CLEANING & CARE
TUMBLE DRYER
Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do
not use any organic solvent or corrosive agent to avoid damage to the device.
DRUM
After some operation time, fabric care agents or calcium contained in the water
some detergent to remove it. Do not use any organic solvent or corrosive agent
to avoid damage to the device.
EVAPORATOR
a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.
ERROR CODES
CODE CAUSE SOLUTION
F2 Drain pump error. Contact the customer service.
F31, F32,
F33
The condenser thermal
sensor is open-circuited or
short-circuited.
Contact the customer service.
F4 Temperature of the laundry
in the drum does not
change.
Contact the customer service.
E6
E7 Under voltage or over
voltage fault.
Check the voltage of power suply.
Or contact the customer service.
E8
Reduce the load,Repower the dryer.
Or contact the customer service.
Over load warning.
Lo
Use the dryer when air temperature
is higher than 2 .
Temperature is too low.
The filters is clogged.
Clean both filters.