Filter
Top Products
English | 11
6 Timer buttons Modify the default time to your needs, using the +
and - timer buttons.
7 Empty tank indicator Water tank must be emptied.
Important: Empty the water tank after each
drying cycle. See Empty the water tank section
of the manual.
8 Delicate button Use this function for delicate fabrics. It lowers the
temperature and lengthens the drying cycle time
to take better care of the laundry.
9 Anti-Crease button Use this function to lengthen the automatic
anticrease phase at the end of each program by
60 minutes.
Note: The laundry can be removed at any time
during the anti-crease phase.
10 Rack button Press the Rack button if the rack should be used
in a drying cycle.
11 Cool Air button Use this function for fabrics that can not be dried
with one of the heat settings.
12 Start/Pause button Press Start/Pause to Start a drying cycle. Press
button again to pause the drying cycle – indicator
light is flashing. Press button again to continue.
13 Program knob Select one of the 12 programs using this knob.
The indicator of the respective program lights up.
See Program Modes section of the manual for
further information.
14 Power button Press Power button to switch on/off the tumble
dryer.
You can choose signal as you need. To activate
the signal function after the Cool air cycle has
been selected, press temp & delicate for 5 sec.
until the screen show beep on. To deactivate
press both button for 5 sec. again until the screen
show beep off.
signal