Filter
Top Products
English | 17
LINT FILTER CLEANING 1 2
Clean the lint lter after each dry
cycle.
1 Re move the lint lter from the drum.
2 Open up the lint lter.
3 Clean the lint lter form any lint
residuals.
4 Reinstall the cleaned lint lter in the
tumble dryer.
Note: if the lint lter is very dirty, it
can be cleaned under running water.
Let it dry thoroughly before use.
3 4
CONDENSER FILTER CLEANING 1 2
Clean the condenser lter approx.
every 20 dry cycles.
1 Open the Service door.
2 Open the four levers of the condenser
lter.
3 Pull out the condenser lter from its
housing.
4 Remove the rear lter screen.
5 Clean the condenser lter form any
residuals.
6 Reinstall the rear lter to the
condenser lter.
To reinstall the condenser lter, follow
the above steps 3 to 1 in reverse order.
Note: if the condenser lter is very
dirty, it can be cleaned under running
water. Let it dry thoroughly before
use.
3 4
5 6