Filter
Top Products
String
Enter the maximum length of OSD text (ASCII character string).
X/Y
Type the location of the string by entering the X and Y coordinates.
For example, if the coordinates are (0, 0), the time stamp will be shown on the top left of image.
Input range of coordinate value:
X: 0 - 44
Y: 0 - 29
OSD Time configuration
Note
i
The OSD time setting is available only on the 1st camera and the other
cameras do not support the Time OSD setting.
The OSD time is refreshed every 1 second.
Enable
Select Yes in the Enabled box to enable the Time OSD.
Format
The time information is synchronized with a NTP server (this can be configured under System in the
System Data menu). Even though the box is open, it’s not available to correct the time manually.
X/Y
Type the location of the string by entering the X and Y coordinates.
For example, if the coordinates are (0, 0), the time stamp will be shown on the top left of image.
Input range of coordinate value:
X: 0 - 32
Y: 0 - 29
19