Filter
Top Products
Grandstream Networks, Inc. HT503 User Manual Page 17 of 38
Firmware 1.0.4.2 Last Updated: 06/2011
CONFIGURATION GUIDE
Configuring HT503 through Voice Prompt
DHCP
MODE
Follow Table 4 with voice menu option 01 to enable HT503 to use DHCP.
STATIC
IP MODE
Follow Table 4 with voice menu option 01 to enable HT503 to use STATIC IP mode, then use option 02,
03, 04 to set up HT503’s IP, Subnet Mask, Gateway respectively.
FIRMWARE SERVER IP ADDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION SERVER IP ADDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE PROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP, HTTP and HTTPS.
F
IRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode. There are three options:
1) always check, 2) check only when pre/suffix changes, and 3) never upgrade
WAN
PORT WEB ACCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.