Filter
Top Products
Installation
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
. Insert die elbow dn'ough the rear opening and connect
it to tile dlyer internal duct.
. Apply duct tape oil the joint between tile dryer internal
duct and elbow, as shown on page 7.
CAUTION:
Internal duct joints must be secured with tape,
otherwise they may separate and cause a
safety hazard.
ADDING COVER PLATE TO REAR
OF CABINET
PLATE
(KIT WE1M454)
Comlect standard metal elbows and ducts to complete rile
exhaust system. Cover back opening with a plate (Kit
WE1M454) available Kom your local service provider.
Place dryer in final iocauon.
,_ WARNING- NEVER LEAVE THE
BACK OPENING WITHOUT THE PLATE.
For Quesdons on Installadon, Call: 1-800-626-2000 (US) or
Instructions
[_ CHANGING DIRECTION OF
DOOR OPENING
REMOVE4
HINGESCREWS.
REMOVE4HOLEPLUGSAND
PLACETHEMINTHEHOLES
ONTHEOPPOSITESIDE.
ROTATEDOOR1800
ANDREINSTALL.
[_ SERVICING
_k WARNING- LABEL ALL WIRES
PRIOR TO DISCONNECTION WHEN
SERVICING CONTROLS. WIRING
ERRORS CAN CAUSE IMPROPER AND
DANGEROUS OPERATION AFTER
SERVICING/INST ALLATION.
For replacement parts and other infornmtion, refer to
Owner's Mammi for servicing phone mmfl)ers.
500A436P006 1-800-561-3344 (Canada). Pub. # 31-16225 8