Filter
Top Products
13
Spin speed selection
Whenever a new programme is selected, the maximum spin speed of the selected programme is
displayed on the spin speed indicator.
To decrease the spin speed, press the SPIN button. The spin speed decreases gradually, then the
RINSE HOLD and NO SPIN options are shown respectively.
Rinse hold is shown with “
” and no spin is shown with “ ” symbols.
If you do not want to unload your clothes immediately after the programme, you may use the
RINSE HOLD function in order to prevent your clothes from becoming wrinkled in dry conditions.
If you only want to drain the water (without spinning), select DRAIN & SPIN and then select the
NO SPIN speed option using the spin speed adjustment button.
Additional function buttons
Select the required additional functions before starting the programme.
When selected, the button indicator light will be illuminated.
Note: some combinations cannot be selected together (eg Pre-wash and Quick Wash).
It is not possible to activate all the additional functions in all the wash programmes. For example,
if the cotton programme is selected, QUICK WASH and PRE-WASH functions can not be selected
at the same time. If PRE-WASH button is selected first and then QUICK WASH function next, the
LED of the PRE-WASH function will turn off, as it’s no longer an active selection.
An additional function that is not compatible with the programme cannot be selected (see
pages 11 and 12).
Pre-wash
A pre-wash is only worthwhile for heavily-soiled laundry. Without pre-wash you save energy,
water, detergent and time.
Pre-wash without detergent is recommended for lace and curtains.
Quick wash
This function can be used for the COTTONS and SYNTHETICS programmes. It decreases the
washing times for lightly soiled garments and also the number of rinsing steps in the programme.
Rinse plus
With this function, you can increase the number of current rinsing steps. This reduces the
amount of residual detergent left on the clothes, this is ideal for people with sensitive skin.
Selecting a programme and operating your machine