Filter
Top Products
PROBLEM SOLVING
SAVING WATER
• FULL LOADS Full loads use water more
efficiently than part loads.
• WATER SAVER The Water Saver option minimizes
the amount of water used in the rinse. (Refer to
Water Saver page 12.)
• SINGLE DEEP RINSE You can adjust the rinse
option on Regular, Heavy Duty and Wool cycles
to have one deep rinse only. (Refer to Rinse
Options page 25.)
• AUTO WATER LEVEL You can adjust Auto water
level to fill with less water. (Refer to Auto Water
Fill Level page 27.)
Your Smart Drive also offers several ways of reusing
the wash and rinse water.
RECYCLING THE WASH WATER
1. Select SOAK on the first wash cycle.
2. Remove the clothes at the end of the wash phase
and add the second load to the wash water.
3. Select the wash cycle for the second load.
You may need to add extra detergent.
4. Remove the second load at the end of the cycle.
5. Replace the first load, select rinse and complete
the wash cycle.
RECYCLING THE WATER FROM DEEP RINSE
1. Select SPIN HOLD on the first wash cycle.
(You cannot use the Water Saver option when
recycling the water from deep rinse.)
2. Remove the clothes at the end of the rinse and
add the second load to the rinse water.
3. Select the wash cycle for the second load.
4. Remove the second load at the end of the cycle.
5. Replace the first load and spin dry.
PROBLEM SOLVING
31
1133 LDY Use & Care (USA) 16/5/01 3:34 PM Page 33