Filter
Top Products
END OF CYCLE BEEPS
The beeps signaling the end of the cycle can be
increased or decreased.
1. Enter the Option Adjustment Mode as explained
on pages 23 and 24.
2. Use the Wash Option button to select the
number of beeps you prefer.
TIME SAVER light on = 15 beeps
SOAK light on = 5 beeps
WATER SAVER light on = no beeps
3. Press POWER to return to normal mode.
OUT OF BALANCE RECOVERY
ROUTINE
When your Smart Drive is spinning it can sense when
the wash load is out of balance and will stop and
retry spinning. If the machine still senses an
unbalanced load there are two options the machine
can take.
• Automatic Recovery Option:
Your Smart Drive tries to automatically correct
the out of balance load. If it detects an unbalanced
load, it will fill with water and agitate to redistribute
the load before trying to spin up again.
• Machine Stops Option
Your Smart Drive will stop, giving a short burst of
beeps every five seconds and the first RINSE or
SPIN light, as well as the SPIN SPEED light will flash.
You must redistribute the load more evenly yourself.
Use this option if you wish to conserve water.
1. Enter the Option Adjustment mode as explained
on pages 23 and 24.
2. Use the Heavy DUTY button to select the Out of
Balance recovery option you prefer.
HEAVY DUTY light on = automatic
HEAVY DUTY light off = stops
3. Press POWER to return to normal mode.
26
1133 LDY Use & Care (USA) 16/5/01 3:34 PM Page 28