Fisher & Paykel DG62T27C Clothes Dryer User Manual


 
19
Fitting the front feet
Note: Dryer is usually supplied with feet fitted and protruding the correct distance.
1
Tilt the dryer back using a hand trolley and making sure the trolley and dryer are secure.
2
Fit a rubber insert to each plastic foot as shown.
Fig.17 Inserting rubber inserts
3
Screw the feet into the foot retainers on the left hand and right hand sides as shown.
Fig.18 Adjusting feet
4
Screw both feet in so they protrude ½” (12 mm) below the bottom of the wall on the foot retainers.
Fig.19 Final foot position
Installation instructions
EN