Filter
Top Products
5.
Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite
side and screw down.
6.
Re-insert cover plates Bon the opposite site having first rotated them through 180°.
7.
Unscrew cover plates D from the front
of the machine, rotate through 180°,
screw on the opposite side.
8.
Unscrew door lock E, push down slightly
and remove from the front of the ma-
chine.
9.
Press snap-in button F in and down,
press cover down slightly and remove
from front of the machine.
10.
Change door lock E over to the opposite
side, screw down the door interlock.
11.
On the other side, insert cover F and al-
low snap-in button to lock into place.
12. Insert loading door and hinges into re-
cesses on the front of the machine and
screw down.
Note regarding contact protection: The
machine is only secure for operations again
once all plastic parts have been inserted.
Special accessories
Stacking kit
D
D
E
E
F
F
52
Installation