use electrolux 17
Opening the door after the
programme has started
First set the machine to pause by
pressing the «Start/Pause» button.
If the «Door locked» icon
desappears on the display, the door
can be opened.
If the «Door locked» light does not
goes off, this means that the machine
is already heating, that the water level
is above the bottom edge of the door
or that the drum is turning. In this case
the door can not be opened.
If you cannot open the door but you
need to open it you have to switch the
machine off by turning the selector dial
to O.
After about few minutes the door can
be opened (pay attention to the
water level and temperature!).
At the end of the programme
The machine stops automatically.
Some acoustic signals sound for few
minutes.
If the Rinse Hold or Night Cycle
options have been selected, the
Start/Pause light goes off, a flashing
“
0.00” will appear on the display, the
(Door locked) icon is still visualized
and the door remains locked to
indicate that the water must be
emptied out before opening the door.
To empty out the water please read
the steps on the Rinse Hold option
paragraph.
At the end of the cycle, turn the
programme selector dial to «O» to
switch the machine off. Remove the
laundry from the drum and carefully
check that the drum is empty. If you do
not intend to carry out another wash,
close the water tap.
Leave the door open to prevent the
formation of mildew and unpleasant
smells.
132969690_GB.qxd 13/09/2007 11.37 Pagina 17