Filter
Top Products
use electrolux 11
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the red
«Start/Pause» pilot light will flash 3
times and the message Err will appear
on the display to indicate a wrong
selection. The machine will not perform
the new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These
must be selected after choosing the
desired programme and before
depressing the «Start/Pause» button.
In any case if you select an option not
compatible with the selected
programme or option, the message Err
will displayed at the bottom of the
display for few seconds, and the
integrated red «Start/Pause» light start
flashing.
Select the temperature
Press this button repeatedly to
increase or decrease the temperature,
if you want your laundry to be washed
at a temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for
Cottons, 60°C for Synthetics, 40°C for
Delicates, Wool, fabrics to be
handwashed and Lingerie
programmes, and 30°C for Silk, while
corresponds to cold wash.
During the washing cycle the
thermometer is animated.
Select the spin speed, No spin,
Rinse Hold or Night Cycle option
Press the Spin button repeatedly to
change the spin speed, if you want
your laundry to be spun at a speed
different from the one proposed by the
washing machine.
During the spinning phase the spiral is
animated.
Maximum speeds are:
● for all Cottons: 1200 rpm;
● Wool and Handwash: 1000 rpm
● for Synthetics and Lingerie: 900 rpm;
● for delicate fabrics and Silk: 700 rpm.
No spin option eliminates all the
spin phases (in some programmes
increases also the number of rinses).
Rinse Hold : by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing.
When the programme has finished the
display shows a
0.00 flashing, the
(Door) icon is still visualized, the
«Start/Pause» light is off and the door
is locked to indicate that the water
must be emptied out.
132969690_GB.qxd 13/09/2007 11.37 Pagina 11