Filter
Top Products
Cleaning the water inlet filters
If the appliance doesn't fill, takes long to fill water, the starting button blinks yellow or the
display (if available) shows the relevant alarm (see chapter "What to do if..." for more details),
check if the water inlet filters are blocked .
To clean the water inlet filters:
1. Turn off the water tap.
2. Unscrew the hose from the tap.
3. Clean the filter in the hose with a stiff
brush.
4. Screw the hose back onto the tap. Make
sure the connection is tight.
5. Unscrew the hose from the machine. Keep
a rug nearby because some water may
flow.
6. Clean the filter in the valve with a stiff
brush or with the piece of cloth.
7. Screw the hose back to the machine and
make sure the connection is tight.
8. Turn on the water tap.
22
Care and cleaning