Filter
Top Products
22
Programming options
Objective Implementation
Permanently program
in the audible signal
which reminds you that
the programme is com-
plete.
1.Turn the programme selector to any programme.
2.Press the AUDIBLE SIGNAL button and hold down for ap-
prox. 5 seconds.
A brief signal sounds several times. The AUDIBLE SIGNAL
display flashes several times.
The setting is permanently programmed.
The setting is cancelled as described under 1 and 2.
Adjust detection of de-
gree of drying:
If the laundry is slightly
drier or slightly damp-
er at the end of the
programme than with
the standard setting.
1.Turn the programme selector to any programme.
2.Press the SENSITIVE and START/PAUSE buttons at the
same time and hold down for approx. 5 seconds.
The current setting is displayed on the programme
progress display:
– END display: Setting for drier laundry
– COOLING display: Standard setting
– DRYING display: Setting for damper laundry
3.Press the START/PAUSE button until the setting required
appears on the programme progress display.
4.Turn the programme selector to OFF.
The setting is permanently programmed.
If the EMPTY WATER
display is to remain
permanently deactivat-
ed when using an ex-
ternal condensate
drain.
1.Turn the programme selector to any programme.
2.Press the SPECIAL CARE and AUDIBLE SIGNAL buttons at
the same time and hold down for approx. 5 seconds. The
EMPTY WATER display flashes briefly.
The EMPTY WATER display is permanently deactivated.
Settings may be cancelled as under 1 and 2, but the EMPTY
WATER display is briefly illuminated (instead of flashing).