Filter
Top Products
20
When pressing a but-
ton, the corresponding
button flashes several
times.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Turn the programme knob to
OFF. Set the programme again.
Drum light does not
work.
Programme selector in OFF
position.
Turn programme selector to
LIGHT or to any programme.
Defective lamp.
Replace lamp (see next sec-
tion).
Programme inactive,
EMPTY WATER display
illuminated.
Condensate tank is full.
Empty condensate tank, then
start programme with START/
PAUSE button.
Drying cycle ends
shortly after pro-
gramme starts. END
display illuminated.
Not enough washing load-
ed or washing loaded is too
dry for selected programme.
Select time programme or
higher drying level (e.g. INTEN-
SIVE DRY instead of STORAGE
DRY).
Drying cycle lasts an
unusually long time.
Note:
After up to 5 hours the
drying cycle finishes
automatically
(see ”Drying cycle
complete”).
Lint filter clogged. Clean lint filter.
Heat exchanger clogged
with lint.
Clean heat exchanger.
SPECIAL CARE button
pressed and load volume too
big.
SPECIAL CARE is only suitable
for use with loads of up to
3kg!
Load volume too big. Reduce load volume.
Laundry insufficiently pre-
drained.
Laundry must be adequately
pre-drained.
Problem Possible cause Remedy