Filter
Top Products
17
1.Pull drawer containing condensate
tank
out all the way.
2.Pull out condensate tank’s outlet
connections and pour condensate
out into basin or other suitable
container.
3.Slide outlet connections in and re-
fit condensate tank.
If the programme has been inter-
rupted as a result of the conden-
sate tank being full:
Press the START/PAUSE button to continue the drying cycle.
3 The condensate tank has a volume of approx. 4 litres. This is sufficient
for around 6kg of laundry which has previously been spun at 800 revo-
lutions/minute.
3 The condensate can be used as distilled water, e.g. for steam ironing.
However first filter the condensate (e.g. with a coffee filter) to remove
any residue and small pieces of fluff.
Cleaning heat exchanger
If the HEAT EXCHANGER display is illuminated, the heat exchanger
needs to be cleaned.
1 Caution! Operating when the heat exchanger is clogged with lint can
damage the dryer. This also increases energy consumption.
1.Open loading door
2.Open base door. To do this, press
the release button on the bottom
of the loading opening and open
the door to the left.
3.Remove lint from the inside of the
door and the heat exchange cham-
ber.