Page 6
4 5 6 7 8 9 10 1 2 3
8 TEMPERATURE SELECTION
• Press this button repeatedly to select the wash temperature you may require. Illuminated
windows on the display panel will confirm your selection.
• Cold > 30°C > 40°C > 60°C > 95°C > Cold
9 RINSE AND SPIN (Maximaid 1100 only)
• Press this button if you only wish to rinse and spin a load without washing it first.
8+9 SAFETY LOCK
• When activated, the Safety lock prevents accidental operation of the machine.
• Activating the lock:
• Press the TEMP and RINSE SPIN buttons simultaneously and hold for three seconds.
• ‘CHL’ and the remaining wash time will flash alternately in the display
• In Safety Lock mode, no other button will function except the Power ON / OFF button.
• The Safety lock is cancelled when the power is switched off.
• De-activating the Safety lock while there is power to the machine.
• Press the TEMP and RINSE SPIN buttons simultaneously and hold for three seconds.
10 DOOR OPEN BUTTON
• Should you intentionally wish to open the door during a wash cycle, press the START PAUSE
button and thereafter the DOOR OPEN button.
• After the machine has drained any water from the drum and has cooled the drum down, you may
open the door.
• Will be displayed and no other button other than the POWER ON /OFF button will
function.
THE CONTROL PANEL
The information on pages 5-10 concerns the Maximaid 1100 and the Kombomaid 1100.
Directions for the Kombomaid 1100 drying cycle is found on page 11