Filter
Top Products
Page 5
4 5 6 7 8 9 10 1 2 3
1 POWER ON / OFF
• Press this button to switch the power ON or OFF
2 START / PAUSE
• Press this button to start the selected operation. Pressing it once more stops the machine
temporarily, allowing changes to a programme to be made. Select the programme, make the
changes and press the start / pause button once more to resume operation.
3 PROGRAMME SELECTOR KNOB
• Turn the knob to the required programme. Pilot lights around the dial will confirm your
selection.
4 WASH SELECTION
• Press this button repeatedly to select the type of wash you require. Illuminated windows on the
display panel will confirm your selection.
• Quick wash - (recommended load is 1-2 kg) > Small wash - (recommended load is 2-3kg)
>Main wash > Pre-wash > Soak > back to Quick wash.
5 RINSE SELECTION
• Press this button repeatedly to select the number of rinses you require. Illuminated windows on
the display panel will confirm your selection.
• 1 > ‘Rinse and hold’ > 2 > ‘Rinse and hold’ > 3 > 4 > 5 > ‘ Rinse and hold’ > back to 1.
6 SPIN SPEED SELECTION
• Press this button repeatedly to select the spin speed ( r/min) you require. Illuminated windows
on the display panel will confirm your selection.
• 400 > 600 > 800 > 1000 > 1200 > and back to 400.
7 TIME DELAY SELECTION
• By pressing this button repeatedly, you may delay the start time of your wash by 1 to 12 hours .
The clock in the display window will confirm your selection.
THE CONTROL PANEL
The information on pages 5-10 concerns the Maximaid 1100 and the Kombomaid 1100.
Directions for the Kombomaid 1100 drying cycle is found on page 11