Crosley CFW-8000GR Washer/Dryer User Manual


 
9
Loading
Adding detergent
Drop items into washer loosely.
Items should move easily through wash water for best
cleaning and wrinkle-free results.
Load washer properly and select correct load size
setting. Overloading and selecting a setting too
small for the wash load can :
- Cause poor cleaning
- Increase wrinkling
- Create excessive lint
- Wear out items faster (because of pilling)
Mix large and small items in each load.
Load evenly to maintain washer balance.
An unbalanced load can make the washer vibrate
during spin.
Reduce wash time when using a small load size
setting. Load with only a few small items needs less
wash time.
Use a large load size setting to reduce wrinkling with
permanent press clothes and some synthetic knits.
These items should have more room to move in the
water than heavy items. (towels, jeans)
Detergent case
Adding fabric softner or bleach or liquid detergent
If desired, add measured liquid softner or bleach or
liquid detergent to the softner or bleach or liquid
detergent inlet.
Pour liquid softner or bleach or liquid detergent into
the dispenser
using the amount recommended on the package.
Do not exceed the maximum fill line.
Overfilling can cause early dispensing of the
softner or bleach or liquid detergent which could
stain clothes.
Do not open the detergent case when water is
supplied.
Avoid pouring softner or bleach or liquid detergent
directly on the clothes.
Check to see if the liquid case are even.
Bleach
Main-wash
softener
Pre-wash