Filter
Top Products
18
3. DELICATE PROGRAM
1
2
3
4
Put the laundry into the Drum and put the detergent and softerner into the detergent
case.
Then close the Door.
• Put the detergent into the main wash room(I I marking) and prewash room(I marking)
in the detergent case.
• Liquid detergent, Softner and Bleach should be below ‘MAX‘ level.
• Put the detergent into the pre wash room(I marking) only if you want to add prewash.
Press the Power button.
• The LED shows only ‘- --’ signal.
Select the ‘DELICATE’ program using the program selection dial.
• If you press ‘Start/Pause’ button aftrer pressing Power button without selecting
program, the ‘NORMAL’ program is selected as default program.
• ‘Cold / Cold’ Water temperature and ‘Normal’ soil level and ‘Main Wash’ and ‘1’
times rinse and ‘Low’ spin speed are selected automaically.
• If you want to change the 'Spin Speed' and 'Soil Level' and 'Beeper' , select program
what you want to change by pressing each button.
Press the ‘Start/Pause‘ button.
• The washer will be operated with locking Door and supplying water after sensing the
amount of laundry automatically.
Note
• If you want to change the setting program during operation, press the ‘Start/Pause’ button to hold the operation
and change the program you want to change by pressing each corresponding button.
• Time Delay is not selected.
• Spin speed ‘no spin ~ ‘Medium’ are only selectable.
• Wash/Rinse water Temperature 'cold/cold' is only selected, in oreder to prevent clothes from damaging.