Filter
Top Products
18
• lf your local codes or ordinances do not allow the use of a 3-wire connection, or you are installing your dryer in
a mobile home, you must use a 4-wire connection.
1. Connect neutral wire (white) of power cord to center terminal block screw.
2. Connect red and black wires to the left and right terminal block screws.
3. Connect ground wire (green) of power cord to external ground screw and move neutral ground
wire of appliance and connect it to center screw.
4. Make sure that the strain relief screw is tightened.
Be sure that all terminal block nuts are on tight and power cord is in right position.
Option 1: 4-wire connection with a power supply cord.