Filter
Top Products
9
How to use your dryer
1. Plug in, switch
on electricity.
2. Sort your laundry
(see section “Sorting
Your Laundry”)
3. Open the door.
Check that the fluff
filter is clean (see
section How to
remove and clean
the fluff filter).
4. Load the dryer
placing the clothes
carefully in the drum
pushing them well
towards the back
and away from the
door seal. Close the
door.
5. Select the relevant heat setting
(see section “Sorting Your Laundry”).
When low heat is selected a coloured
indicator (on top of switch) will be
visible.
6. (Selected models only)
Select Audio Signal (Buzzer) option, if
required.
The buzzer is selected with the switch
button ‘IN’ and cancelled with the button
‘OUT’.
8. When finished
open the door and
take out the laundry.
Clean and replace
the fluff filter.
7. Select the
required
programme/ drying
time (See section
“The Controls”).
The dryer will start.
WARNING:
WHEN SWITCHING
ELECTRICITY ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS ARE
DRY.
WARNING:
WHEN SWITCHING
ELECTRICITY ON
OR OFF, PLEASE
ENSURE THAT
YOUR HANDS ARE
DRY.
Button IN
Audio Signal ON
Button IN
HIGH HEAT
Button OUT
LOW HEAT
Button OUT
Audio Signal OFF
Never switch the dryer off with a hot load in the drum.
You must terminate every programme with the Cool Tumble Phase.
9. Switch off
electricity and remove
plug from socket.