20
When finished
After each load
As necessary
Lubrication
Caring for your Dryer
Your tumble dryer needs very little attention. The following simple
steps will keep it performing well.
Switch off electricity and remove plug.
Always clean the filter and turn the drum by hand to check that small
items like handkerchiefs do not get missed.
Clean exterior metal and plastic surfaces with a damp cloth or silicon
polish only. Regularly check and clean if necessary, the vent hose and
any permanent venting fixture to ensure that there has been no accu-
mulation of fluff or lint during the drying process. Do not use abrasive
cleaners, scouring agents, acids, chlorine bleach or metal polish to
clean any part of the machine. These could damage the machine.
Clean fluff from the area behind the front venting adaptor fitted at the
lower left hand corner of the front panel (not fitted to rear venting only
models). The adaptor can be removed by turning it anti-clockwise a
twelfth of a turn. Refitting is the reverse of the above.
Your tumble dryer uses special bearing components. Lubrication by
the user is not necessary and must not be attempted.
We strongly recommend that all appliances are regularly checked for
electrical and mechanical safety.