Filter
Top Products
22
If something goes wrong
First, don’t panic! There may be nothing wrong at all. Look for your
problem below, then check the things we suggest. More often than
not, this will give you the answer to your problem, and you’ll be able
to carry on without having to telephone your Service Centre.
If after this you still cannot get your machine to work, follow the
advice given on the next page.
Check these things first
1. Is the machine plugged in and switched on at the socket?
2. Is the Timer Control set to required programme/time?
3. Is the door securely closed?
4. Has the fuse blown? (Try plugging in another appliance to check)
5. Have you used an extension lead? Many are not suitable. Try
plugging the dryer directly into a socket to check.
1. Have you forgotten to clean the filter? Check it.
2. Have you selected the correct Heat setting for the type of fabric
you are drying? (IN for High, OUT for low).
3. Is the flexible vent hose squashed, blocked or kinked? Check it
for foreign objects or condensate (water).
4. Is the air inlet obstructed in any way?
5. Permanent venting - is flap on the storm cover obstructed?
6. Were the clothes ‘excessively wet’ when they were put in?
7. Was the correct programme/time selected?
8. Have you overloaded the dryer?
1. Has the correct programme been selected for the load?
3 - 5kg programme S - FULL LOAD
1 - 3kg programme S - HALF LOAD
Less than 1kg use timed dry programme.
2. Has high heat been selected?
The Smart Dry programmes will not operate on low heat, if low
heat is required use timed dry.
This is perfectly normal, the dryer has finished its programme. Press
the Ready (Audio) button and the buzzing will stop or turn the Timer
Control to the off ‘O’ position.
Have you re-read this instruction book?
Problem
‘It won’t start’
‘It is taking a long
time to dry’
(All Models)
Auto Programmes
(Some models)
‘The dryer keeps
buzzing’ (Some
models)
Any other
problem