Filter
Top Products
18
EN
selection knob while your machine is
running, your machine stops and new
programme information is displayed
Ending the programme through
canceling
A new program can be selected and started
after “Program cancel” is activated in order to
change the drying program.
To cancel any selected programme:
Press “Start/Pause/Cancel” button for about
3 seconds. “Lint filter cleaning” and “Water
tank” warning symbols light up and “End” label
appears on the screen as a reminder at the end
of this period.
A As the inside of the machine will be
excessively hot when you cancel the
program while the machine is running,
activate the ventilation program to cool it
down.
C If you change the position of programme
selection knob while your machine
is running, then the machine stops,
current programme is cancelled and new
programme information is displayed.
End of programme
“Filter cleaning” and “Water tank” warning
symbols light up and “End” label appears
on the screen in the programme follow-up
indicator when the programme ends. The door
can be opened and the machine becomes
ready for a second cycle.
Press “On/Off” button to turn off the dryer.
C When selected, the 2-hour anti creasing
programme will be activated to prevent
laundry from creasing if you do not take the
laundry out after the programme has come
to an end.
C Clean the filter after each drying (please see,
Filter cleaning).
C Drain the water tank after each drying
(please see, Water tank)