Filter
Top Products
15
EN
Auxiliary function
Audio Warning
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Your dryer will give an audio warning when the
programme comes to an end. If you do not
want to hear this buzzing or want to change the
volume level, you need to press the “Volume
level” button. No audio warning will be given
when “x” appears on the screen.
C You can select this function either before or
after the programme starts.
Drying degree
Used to adjust the required dryness level.
More drying is performed compared to the
default settings when “+” sign appears and
less drying is performed when “-” sign appears.
Programme duration can change depending on
the selection.
A This function must be selected before the
programme starts.
Anti-creasing
A 2-hour anti creasing programme to prevent
laundry from creasing will be activated if you do
not take the laundry out after the programme
is over. This programme rotates the laundry in
600-second intervals to prevent creasing. Press
“Anti-creasing” button to activate.
Anti-creasing is activated but the programme
is running in the first exemplary figure. Drying
is over and the first step of anti-creasing has
started in the second figure.
Changing the contrast
Contrast can be adjusted in order to make
the symbols on the display appear clearer. It
may particularly be necessary to change the
contrast setting of the display when the dryer is
installed over a washing machine.press and
Press and hold the Spin Speed/Time button for
3 seconds.
When the contrast is changed at the end of
3 seconds, all symbols on the display will
become visible for 3 seconds in order to
indicate that the process is complete.
Perform the same procedure to revert back to
the previous contrast setting.
Warning indicators
C Warning indicators may differ according to
the model of your machine.
Filter cleaning
A warning symbol will appear to remind filter
cleaning after the programme finishes.
C If the filter cleaning symbol flashes
continuously, please refer to “Suggested
solutions for problems”.
Water tank
A warning symbol will turn on at the end of
the programme or when the tank is full with
water. The machine stops operating if the
warning symbol turns on when a programme
is running. To restart the machine, please drain
the water in the water tank. Press “Start/Pause/
Cancel” button to start the programme after
you have emptied the water tank. The warning
symbol turns off and the programme resumes
operating.