Beko WMP 511W Washer User Manual


  Open as PDF
of 20
 
11/EN
Washing Machine / User’s Manual
4.7 Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programme will turn on.
Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicatorwiththelights"Running"and
"End/Cancel".
C
INFORMATIONS
Ifthemachinedoesnotpasstothespinningstep,automatic
unbalancedloaddetectionsystemmighthavebeenactivateddueto
theunbalanceddistributionofthelaundryinthemachine.
4.8 Loading door lock
There is a locking system on the loading door of the machine
that prevents opening of the door in cases when the water
levelisunsuitable.
Ifyouwanttoopenloadingdoorwhenthemachineisinuse,
press"Start/Pause"buttontopausethemachine."Door
Open"lightwillstartflashingwhenthemachineisswitched
toPausemode.Machinechecksthelevelofthewaterinside.
Ifthelevelissuitable,"DoorOpen"lightilluminatessteadily
within1-2minutesandtheloadingdoorcanbeopened.
Ifthelevelisunsuitable,"DoorOpen"lightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theloadingdoorwhenthe"DoorOpen"lightisoff,you
havetocancelthecurrentprogramme;see"Cancellingthe
programme".
Switching the machine to pause mode
Pressthe"Start/Pause"buttontoswitchthemachineto
pausemodewhileaprogrammeisrunning."Running"light
startsflashingontheProgrammeFollow-upindicatortoshow
thatthemachinehasbeenswitchedtothepausemode.
Whentheloadingdoorisreadytobeopened,"DoorOpen"
light will illuminate continuously.
Adding or taking out laundry
Press"Start/Pause"buttontoswitchthemachinetopause
mode.Whenthemachineisswitchedtopausemode,
"Running"lightflashes.WaituntiltheLoadingDoorcanbe
opened.OpentheLoadingDoorandaddortakeoutthe
laundry.
ClosetheLoadingDoor.Press"Start/Pause"buttontostart
the machine.
C
INFORMATIONS
Thedoorcanbeopenedifthewaterlevelissuitable.Dooropen
symbolflashesuntiltheloadingdoorgetsreadytobeopened.The
symbol’slightissteadywhenthedoorisreadytoopen.Youcan
open the door to add/take out laundry.
4.9 Cancelling the programme
Tocanceltheprogramme,turntheProgrammeSelectionknob
toselectanotherprogramme.Previousprogrammewillbe
cancelled."End/Cancel"lightwillflashcontinuouslytonotify
thattheprogrammehasbeencancelled.
C
INFORMATIONS
Ifyoustartanewprogrammeaftercancellingthepreviousone,
this new programme will start without draining the water in the
machine.
Ifyoumustcertainlyopentheloadingdoorwhenthe“Door
Open”lightisoff,youneedtouse“Spin+Pump”programme.See
“Spin+Pump”
Re-spinning the laundry
Unbalancedloadcontrolsystemcanpreventspinning
becauseofunbalancedloadoflaundryinthemachine.Ifyou
would like to spin again:
Rearrangethelaundryinthemachine.SelectSpin+Pump
programmeandpress“Start/Pause"button.
4.10 End of programme
"End/Cancel"lightontheprogrammefollow-upindicatorwill
lightuponcetheprogrammecomestoanend;and"Door
Open"symbolflashesfor1-2minutesuntilthedoorisready
toopen.When"DoorOpen"symbolissteadilyilluminated,the
doorcanbeopened.
Toturnoffthemachine,turnprogramselectionknobto"On
/Off"position.Takeoutyourlaundryandclosetheloading
door.Themachinewillbereadyforthenextrun.
4.11 Door Open
"DoorOpen"symbolisilluminatedwhenthedoorisready
toopen.Itflashesuntilthedoorgetsreadytoopen.Ifthe
"DoorOpen"symbolisnotilluminated,donotforcethedoor
toopen.Thesymbol'slightissteadywhenthedoorisready
to open.
4.12 Your machine is equipped
with a “Standby Mode”
Incaseofnotstartinganyprogrammeorwaitingwithout
making any other operation when the machine is turned on
byOn/Offbuttonandwhileitisinselectionsteporifnoother
operation is performed approximately 2 minutes after the
programmeyouselectedhascometoanend,yourmachine
willautomaticallyswitchtoenergysavingmode.Brightnessof
indicatorlightswilldecrease.Also,ifyourproductisequipped
withadisplayshowingtheprogrammeduration,thisdisplay
willcompletelyturnoff.IncaseofrotatingtheProgramme
Selectionknoborpressinganybutton,lightsanddisplay
willrestoretotheirpreviouscondition.Yourselectionsmade
whileexitingtheenergysavingmodemaychange.Check
theappropriatenessofyourselectionsbeforestartingthe
programme.Readjustifnecessary.Thisisnotafault.
 previous next