Beko WMB 71031 PTM Washer/Dryer User Manual


  Open as PDF
of 54
 
12
EN
Auxiliary function selection
Select the desired auxiliary functions before starting
the programme. Furthermore, you may also select
or cancel auxiliary functions that are suitable to
the running programme without pressing the Start
/ Pause button when the machine is operating.
For this, the machine must be in a step before the
auxiliary function you are going to select or cancel.
Iftheauxiliaryfunctioncannotbeselectedor
canceled, light of the relevant auxiliary function will
blink 3 times to warn the user.
C
Some functions cannot be selected together.
Ifasecondauxiliaryfunctionconflictingwith
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will be
canceled and Quick Wash will remain active.
C
An auxiliary function that is not compatible
with the programme cannot be selected. (See
"Programme and consumption table")
C
Auxiliary Function buttons may vary according
to the model of the machine.
• Prewash
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
C
Prewash without detergent is recommended
for tulle and curtains.
• Quick Wash
This function can be used in Cottons and
Syntheticsprogrammes.Itdecreasesthewashing
times and also the number of rinsing steps for
lightly soiled laundry.
C
When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already made
after the main wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to be effected by
the minimal detergent remnants on the laundry can
be reduced.
• Anti-Creasing
This function creases the clothes lesser when they
arebeingwashed.Drummovementisreduced
and spinning speed is limited to prevent creasing.
Inaddition,washingisdonewithahigherwater
level.
• Rinse Hold
Ifyouarenotgoingtounloadyourclothes
immediately after the programme completes, you
may use rinse hold function to keep your laundry
in the final rinsing water in order to prevent them
from getting wrinkled when there is no water in
the machine. Press Start / Pause button after this
process if you want to drain the water without
spinning your laundry. Programme will resume and
complete after draining the water.
Ifyouwanttospinthelaundryheldinwater,adjust
the Spin Speed and press Start / Pause button.
The programme resumes. Water is drained,
laundry is spun and the programme is completed.
• Soaking
The Soaking auxiliary function ensures better
removal of stains ingrained into the clothes by
holding them in the detergent water prior to startup
of the programme.
• Pet hair removal
This function helps to remove pet hair that remain
on your garments more effectively.
When you select this function, Prewash and Extra
Rinse steps are added to the normal programme.
Thus,washingisperformedwithmorewater(30%)
and the pet hair is removed more effectively.
A
Never wash your pets in the washing
machine.
Delayed Start
WiththeDelayedStartfunctionthestartupof
the programme may be delayed up to 19 hours.
Delayedstarttimecanbeincreasedbyincrements
of 1 hour.
C
Donotuseliquiddetergentswhenyouset
DelayedStart!Thereistheriskofstainingof
the clothes.
Opentheloadingdoor,placethelaundryandput
detergent, etc. Select the washing programme,
temperature,spinspeedand,ifrequired,the
auxiliary functions. Set the desired time by pressing
theDelayedStartbutton.PressStart/Pause
button. The delayed start time you have set is
displayed.Delayedstartcountdownstarts.“_”
symbol next to the delayed start time moves up
and down on the display.
C
Additional laundry may be loaded during the
delayed start period.
At the end of the countdown, duration of the
selectedprogrammewillbedisplayed.“_”symbol
will disappear and the selected programme will
start.
Changing the Delayed Start period
Ifyouwanttochangethetimeduringcountdown:
PressDelayedStartbutton.Timewillincreaseby
1houreachtimeyoupressthebutton.Ifyouwant
todecreasethedelayedstarttime,pressDelayed
Start button repeatedly until the desired delayed
start time appears on the display.
Canceling the Delayed Start function
Ifyouwanttocancelthedelayedstartcountdown
and start the programme immediately:
SettheDelayedStartperiodtozeroorturnthe
Programme Selection knob to any programme.
Thus,DelayedStartfunctionwillbecanceled.The
End/Cancel light flashes continuously. Then, select
the programme you want to run again. Press Start
/ Pause button to start the programme.
 previous next