Beko WMA 667 W Washer User Manual


 
EN
23
Program in rinse hold mode
This process is shown with the
flashingSpinSymbol(Figure3-13c)
and the lit up Standby Symbol
(Figure3-13k).
If you wish to spin when the machine is
inthismode:
Adjustthespinspeed.Press“Start/
Pause/Cancel”button(Figure2-10).
The program continues, pumps out
the water and spins. Standby Symbol
(Figure3-13k)fadesoutandStart
Symbol(Figure3-13j)lightsup.
If you want to discharge the water only
withoutspinning:
Press“Start/Pause/Cancel”button
(Figure2-10).Standbysymbol(Figure
3-13k)willfade.Startsymbol(Figure
3-13j)willlightup.Theprogram
continues and only pumps out the
water.
End of program
When the program is finished, the
symbols of the relevant steps will remain
lit up and the auxiliary function, spin and
temperature data selected at the start-
up of the program will remain selected.
“End”labelwillappearonthescreen.