Beko WMA 667 W Washer User Manual


 
EN
22
indicate the beginning of prewash step.
Main wash
Mainwashsymbolwilllightupto
indicate that the main wash cycle has
started.
Rinse
Rinse symbol lights up at the beginning
of the rinse step.
Softener
Softener symbol lights up at the
beginning of softener step.
Spin
Spin symbol will light up at the beginning
ofthefinalspin,during“Spin”and
“Pump”specialprograms.
If the machine is not spinning, the
program may be in rinse hold mode
or the automatic spin correction
system has been activated because
of the excessive unbalanced
distribution of the laundry in the
machine.
Changing the selections after
the program has started
The selected spin speed and program
temperature fade out. An empty frame
appears.
Whenthe“Programselection”buttonis
brought to the appropriate position, rpm
and temperature data reappear.
Switching the machine to standby
mode
Machineisswitchedtostandbymode
bypressing“Start/Pause/Cancel”button
(Figure2-10)forashorttime.Standby
symbol(Figure3-13k)whichindicates
that the machine is in standby mode
lightsupandthestartsymbol(Figure
3-13j)thatshowstheprogramhas
started and is still continuing fades out.
Selecting or cancelling an auxiliary
function in standby mode
Auxiliary functions can be cancelled or
selected in accordance with the step the
program is at.
Adding/taking out laundry in standby
mode
The door can be opened if the water
level is suitable. The door locked symbol
(Figure3-13i)willlightupuntilthedoor
is suitable for opening. This symbol will
fade out as soon as the door is allowed
to open. Laundry may be added / taken
out by opening the door.
Door lock
DoorLockedSymbol(Figure3-13i)lights
up when the loading door is locked. This
symbol will flash until the door is allowed
to open. Do not force the door at this
stage. This symbol will fade out as soon
asthedoorisallowedtoopen.Youmay
open the door after the symbol fades
out.
Child-proof lock
Youcanprotecttheappliancefrom
being tampered by children by means
of the child-proof lock. In this case, no
change can be made in the running
program.
2. The machine is switched to child-lock
by pressing the 2nd and 4th auxiliary
functionsfor3sec.“C:on”(Childlockis
activated)labelappearsonthescreen.
The same symbol will also be displayed
on the screen whenever any button
is pressed while the machine is child-
locked.
To deactivate the child-proof lock,
press the 2nd and 4th auxiliary function
buttons for 3 sec.
“C:OFF”(Childlockisdeactivated)label
appears on the screen.
Cancelling the program
“Start/Pause/Cancel”button(Figure
2-10)ispressedfor3secondstocancel
theprogram.Startsymbol(Figure
3-13j)willflashduringcancellation.
After cancellation, the symbol of the
corresponding step at which the
cancellation was made will remain lit and
“End”labelwillappearonthescreen.