Beko WDA 91440 W Washer/Dryer User Manual


  Open as PDF
of 64
 
User’s Manual
61 / EN
Troubleshooting
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any
damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.
(**)Regulardrumcleaningisnotapplied.>>>
Clean the drum regularly. See, 6.2
A
CAUTION
¾ If you cannot eliminate the problem although you follow the instructions in this
section, consult your dealer or the Authorised Service Agent. Never try to repair a
nonfunctional product yourself.
Drying process lasts long.
• PoresoftheAirinletfilterinfrontofthemachinemightbeclogged.>>>Wash the Air inlet filter with lukewarm
water.
• TheAirinletfilterinfrontofthemachinemightbeblocked.>>>Remove everything, if any, that is blocking ventilation
in front of the Air inlet filter.
• Ventilationmaybeinadequateduetotheverysmallareaofinstallation.>>>Open the doors and windows to avoid
too much increase in the ambient temperature.
• Excessivelaundrywasloadedin.>>>Do not overload the Washer-Dryer.
• Laundrymaynothavebeenspunadequately.>>>Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
• Tapisturnedoff.>>>Open the taps.
Laundry remains wet at the end of drying.
• Improperprogrammemighthavebeenusedforthelaundrytype>>>Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally.
• PoresoftheAirinletfilterinfrontofthemachinemightbeclogged.>>>Wash the Air inlet filter with lukewarm
water.
• Excessivelaundrywasloadedin.>>>Do not overload the Washer-Dryer.
• Laundrymaynothavebeenspunadequately.>>>Have the Washer-Dryer perform spin in a higher spin speed
during washing step.
Machine does not turn on or the programme does not start.
• Powercablemightnotbepluggedin.>>>Make sure that the power cable is plugged in.
• ProgrammemightnotbesetorStart/Pause/Cancelbuttonmightnotbepressed.>>>Make sure that the
programme has been set and the machine is not in Pause mode.
• Ensuredrainhoseheightandpositioniscorrectsee“Installation”
• Childlockmightbeenabled.>>>Deactivate the Child Lock.
Laundry is shrunk, yellowed, felted or damaged.
• Improperprogrammemighthavebeenusedforthelaundrytype>>>Select a proper programme for the type of the
laundry by checking the maintenance tags on the clothes or use time programmes additionally. Laundry not suitable
for drying should not be dried.
Drying cannot be performed
• Laundrymightnotbedryordryingfunctionhasnotbeenenabled.>>>Check if drying function is also selected after
the selected washing programme.
Loading door cannot be opened.
• Loadingdoorofthemachinemaynotbeopenedduetosafetyreasons.>>>If "wait to cool down to open...."
warning is displayed, machine will keep the loading door locked for your safety until it cools down. You can accelerate
cooling by running any 10-minute drying programme.
 previous next