Filter
Top Products
User’s Manual
15 / EN
Installation
3.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement block. Remove the packaging
reinforcement block by pulling the ribbon. Ensure that the block is completely removed.
DANGER
¾ The product is heavy. Remove the packaging reinforcement as
illustrated.
¾ Pay attention not to trap your hand under the machine during this
procedure.
3.3 Removing the transportation locks
A
CAUTION
¾ Do not remove the transportation locks before taking out the packaging reinforcement.
¾ Remove the transportation safety bolts before operating the washing machine!
Otherwise, the product will be damaged.
1 2 3
1 Loosen all bolts with the tool supplied in the User Manual bag until they turn freely. (C)
2 Remove transportation safety bolts by turning them gently.
3 Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. (P)
C
NOTE
¾ Keep the transportation safety bolts in a safe place to reuse when the machine needs to
be moved again in the future.
¾ Never move the product without the transportation safety bolts properly fixed in place!