Filter
Top Products
22 - EN
For the condenser (products
equipped with a condenser);
Hot and humid air in the condenser is
cooled with the cold air from the room.
Thus, the humid air circulating in your
machine is condensed and then pumped
into the tank.
C Clean the condenser after every 20
drying cycles or once a month.
To clean the condenser;
1 If a drying process has been carried
out, open the door of the machine and
wait until it cools down.
2 Unlock the 4 condenser locks after
opening the kick plate.
3 Pull out the condenser.
4 Clean the condenser with pressurized
water and wait until the water drains.
5 Replace the condenser with the side
labeled “Top” facing upwards. Lock the
4 condenser locks. Make sure that the
red lock on the upper right corner is
engaged securely.
6 Close the kick plate cover.
Close properly and
check the locking
latchs?