Beko DRCS 68 S Clothes Dryer User Manual


 
17 - EN
Auxiliary function
Cancel Audio Warning
Your machine will send out an audio
warning when the programme comes to
an end. If you do not want to hear this
buzzing, you need to press the “Cancel
Audio Warning” button. The relevant LED
will light up when this button is pressed
and an audio warning will not be given
when the programme comes to an end.
C You can select this function either
before or after the programme starts.
Warning indicators
C Warning indicators may differ
according to the model of your
machine.
Filter cleaning
A warning LED will light up to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning LED
lights up continuously, please refer to,
“Solution suggestions for problems”.
Water tank
A warning LED will light up at the end of
the programme or when the tank is full
with water. The machine stops operating
when this warning LED lights up during
a programme running. To restart the
machine, please drain the water in the
water tank. Press “Start/Pause/Cancel”
button to start the programme after
you have emptied the water tank. The
warning LED goes off and the programme
resumes operating.
Starting the Programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause/Cancel” button will light
up to indicate that the programme has
started.
Progress of programme
Progress of a running programme is
shown through the programme follow-up
indicator.
At the beginning of every programme
step, the relevant indicator LED will light
up and light of the completed step will
turn off.
“Drying”:
- Drying level will be illuminated during
the whole drying process until the drying
degree reaches “ Ready to Iron “.
“ Ready to Iron “:
- Starts to illuminate when the drying
degree reaches “ Ready to Iron “ step and
remains illuminated until the next step.
“ Ready to Wear “:
- Starts to illuminate when the drying
degree reaches “ Ready to wear “ step
and remains illuminated until the next
step.
“Final / Anti-creasing”:
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after
the programme has started
You can use this feature after your machine
has started to dry your clothes under higher
or lower temperatures.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme.
Select the “Extra Dry” programme by
rotating the programme knob.
Press “Start/Pause/Cancel” button to start
the programme.
C The programme which is selected first will
go on even if the programme selection
button is moved and another programme
mode is selected while the machine is
operating. You must cancel the ongoing
programme in order to change the drying
programme. (See, Ending the program
through canceling)