Filter
Top Products
18
EN
C Anti-creasing icon will light up at the
end of the programme if anti-creasing
function is active.
Changing the programme after the
programme has started
You can use this feature to dry your laundry in a
different program after your machine has started
to run.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme. Select the “Extra Dry”
program by rotating the program knob.
Press “Start/Pause/Cancel” button to start
the program.
C If you select a new programme by
turning the programme selection knob
while your machine is running, then the
current program is cancelled and new
programme information is displayed.
Adding/removing laundry in
standby mode
In order to add or take out laundry after
the start-up of the programme;
1. Press the “Start/Pause/Cancel” button
to switch the machine to “Pause”
mode. Drying process will stop.
2. Open the door at Pause position and
close it again after adding or taking out
laundry.
3. Press “Start/Pause/Cancel” button to
start the program.
C Any laundry added after the drying
process was started may cause the
already dried clothes in the machine
intermingle with wet clothes and the
result will be wet laundry after the
drying process is over.
CLaundry may be added or taken out
as much as desired during a drying
process, but as this process will
interrupt drying continuously, it will
extend the program duration and
increase energy consumption.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C If you select a new programme by
turning the programme selection knob
while your machine is in standby,
then the current program is cancelled
and new programme information is
displayed.
Child-proof lock
There is a child-proof lock to prevent
any programme interruption due to the
pressing of button while the programme is
running. The loading door and all button
except the “On/Off” button on the panel
are deactivated when the child-proof lock
is active.
In order to activate the child-proof lock,
press on the “audio warning” and “anti-
creasing” buttons simultaneously for 3
seconds.
To start a new programme after the
programme is over or to interrupt the
programme, the child-proof lock should be
deactivated. Press the same buttons for
3 sec. again to deactivate the child-proof
lock.
Lock symbol will appear on the screen
when the child-proof lock is activated.
C Child-proof lock will also be deactivated
when the machine is restarted by
pressing the on/off button.
When the child-proof lock is activated:
• Display icons will not change even if the
position of programme selection knob
is changed while the machine is running
or in halt.
• If the child-proof lock is deactivated
after changing the position of the
programme selection knob while your
machine is running, your machine stops
and new programme information is
displayed