Filter
Top Products
16
EN
Auxiliary function
Audio Warning
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear this buzzing or want
to change the volume level, you need to
press the “Volume level” button. No audio
warning will be given when “x” appears on
the screen.
C You can select this function either
before or after the programme starts.
Drying degree
Used to adjust the required dryness level.
More drying is performed compared to
the default settings when “+” sign appears
and less drying is performed when “-” sign
appears. Programme duration can change
depending on the selection.
A This function must be selected before
the programme starts.
Anti-creasing
A 2-hour anti creasing programme to
prevent laundry from creasing will be
activated if you do not take the laundry
out after the programme is over. This
programme rotates the laundry in
600-second intervals to prevent creasing.
Press “Anti-creasing” button to activate.
Anti-creasing is activated but the
programme is running in the first
exemplary figure. Drying is over and the
first step of anti-creasing has started in the
second figure.
Changing the contrast
Contrast can be adjusted in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.press and
Press and hold the Spin Speed/Time
button for 3 seconds.
When the contrast is changed at the end
of 3 seconds, all symbols on the display
will become visible for 3 seconds in order
to indicate that the process is complete.
Perform the same procedure to revert
back to the previous contrast setting.
Warning indicators
C Warning indicators may differ according
to the model of your machine.
Filter cleaning
A warning symbol will appear to remind
filter cleaning after the programme finishes.
C f the filter cleaning symbol flashes
continuously, please refer to
“Suggested solutions for problems”.
Water tank
A warning symbol will turn on at the end
of the programme or when the tank is full
with water. The machine stops operating
if the warning symbol turns on when a
programme is running. To restart the
machine, please drain the water in the
water tank. Press “Start/Pause/Cancel”
button to start the programme after you
have emptied the water tank. The warning
symbol turns off and the programme
resumes operating.
Cleaning the condenser
Warning symbol turns on with certain