Filter
Top Products
17
EN
intervals to remind that the condenser
needs cleaning.
Door open
Dryer door open symbol lights up.
Time delay
With the “Time delay” function you can
delay the programme start up to 24 hours.
1. Open the loading door and put the
laundry in.
2. Set the drying programme and spin
speed, and if required, select the
auxiliary functions.
3. Press “Time delaying” buttons “+” and
“-” to set the desired time delay. The
time delay symbol will flash.
4. Press “Start/Pause/Cancel” button.
Then the time delay starts to count
down. The Time delay symbol lights up.
Start symbol lights up.
The “:” in the middle of the displayed time
delay will start flashing.
More laundry may be loaded or taken out
during the time delay period. At the end of
the time delay countdown process, time
delay symbol fades, drying process starts
and the programme duration is displayed.
The time on the display is the total of
normal drying time and delay time.
Time delay is started by pressing the start/
pause/cancel button in the exemplary
figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for
3 seconds to cancel the programme.
Time delay function must be set again
for the required time.
2. Press Time delay buttons “+” or “-” to
set the desired time delay.
3. Press “Start/Pause/Cancel” button. The
Time delay symbol lights up. Pause
symbol fades. Start symbol lights up.
4. The “:” in the middle of the displayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the programme
immediately:
1. Press “Start/Pause/Cancel” button for 3
seconds to cancel the programme.
2. Then, press “Start/Pause/Cancel”
button to start the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. “Start/Pause” symbol will light up
to indicate that the programme has
started and “:” symbol between the
remaining time will continue flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is
shown through a number of symbols on
the screen.
At the beginning of each programme
step, the relevant symbol in the series
of symbols will light up and thus, all
symbols will remain lit up at the end of
the programme. The symbol that is lit up
at the far right of the series of symbols
indicates the step that is being carried out.
“Drying”:
- Lights up in all programmes apart from
drying and ventilation.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“Cupboard Dry”:
Starts to illuminate when the drying degree
reaches “wardrobe dry” step, and remains
illuminated until the next step.
“Extra Dry”:
Starts to illuminate when the drying degree
reach to “wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.