Filter
Top Products
16
EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you do
not want to hear the audio warning, press
“Cancel Audio Warning” button. The relevant
light will turn on when this button is pressed
and an audio warning will not be given when
the programme comes to an end.
C You can select this function either before
or after the programme starts.
Warning indicators
C Warning indicators may differ according
to the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning light lights up
continuously, please refer to, “Suggested
solutions for problems”.
Water tank
Warning light starts flashing when the tank is
filled with water. The dryer stops operating if
the warning light turns on when a programme
is running. Drain the water in the water tank
to restart the dryer. Press “Start/Pause/
Cancel” button to start the programme
after you have emptied the water tank. The
warning light turns off and the programme
resumes operating.
Time delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can
delay the programme start up to 3 hours, 6
hours or 9 hours.
1. Open the loading door and put the
laundry in.
C Make sure that all air outlets are open,
door filter is cleaned and the water tank
is empty.
2. Set the drying programme and, if
required, the auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the
same button is pressed again, 6 hours;
and if pressed once more, 9 hours delay
will be selected. If the time programming
button is pressed one more time, time
delaying function will be cancelled. Set
the time delay as you require.
4. Delayed operation of the selected
programme is started by pressing
the "Start/Pause/Cancel" button after
selecting the time delay.
C Additional laundry may be loaded / taken
out during the time delay period.
C During the time delay period, laundry
is rotated for 4 seconds in every 10
minutes to prevent creasing.
Cancelling the time delay
If you want to cancel the time delay
countdown and start the programme:
1. Press “Start/Pause/Cancel” button for
about 3 seconds.
2. Press “Start/Pause/Cancel” button to
start the programme right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
Progress of programme
Progress of a running programme is shown
through the programme follow-up indicator.
At the beginning of every programme step,
the relevant indicator LED will light up and
light of the completed step will turn off.
“Drying”:
- Drying level will be illuminated during the
whole drying process until the drying degree
reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“Cupboard dry”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the programme comes
to an end and anti-creasing function is
activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).
Changing the programme after it
has started
You can use this feature to dry your clothes
under higher or lower temperatures after your
dryer has started.
For example;
1. Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to “Cancel”
the programme in order to select “Extra
Dry” programme instead of “Iron Dry”
programme.
2. Select the “Extra Dry” programme by
rotating the programme selection button.