Beko D2 8101 ES D2 8101 E Washer User Manual


  Open as PDF
of 33
 
17 - EN
program appears on the temperature
indicator(13b).
To change the temperature, press
thetemperaturebutton(Figure
2-9).Temperaturedecreasesin10°
increments.
Coldselectionisshownwith“-”symbol.
Whenthe“Temperature”buttonis
pressed after Cold is selected, the
maximum temperature of the program
you have selected will be displayed.
To decrease the temperature, press the
“Temperature”buttonagain.
90˚C
Normally soiled, white
cottonsandlinens.(Ex.:
coffee table covers,
tablecloths, towels, bed
sheets)
60˚C
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.:shirts,nightgowns,
pajamas)andlightlysoiled
whitelinenclothes(Ex.:
underwear)
40˚C
30˚C Cold
Blended clothes including
synthetics and woolens as
well as delicates.
Economy Symbol
Shows energy saving programs and
temperature selections.
As "Intensive" and "Hygiene" programs
are long programs with higher
temperature selections to ensure
hygiene,“Economy”Symbol(Figure
3-13g)willnotlightup.
e
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator(Figure3-13a).
To decrease the spin speed, press
the“Spin”button (Figure2-7).Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ”andno
spin is shown with “ ”symbols.
e
If you are not going to unload your
clothes immediately after the cycle, you
may use rinse hold function in order to
prevent your clothes become wrinkled
when there is no water in the machine.
With this function, your laundry is kept
in the final rinsing water. If you want to
spin your laundry after the rinse hold
function:
- Adjust the spin speed.
- Press“Start/Pause/Cancel”button.
Programresumes.Yourmachine
drains the water and spins your
laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the
end of the program.
 previous next