Filter
Top Products
7
4. Pilot light goes off when the
required temperature is reached. The
iron is now ready for use.
5. Hold the iron between 15 and 30
centimeters away from the garment.
6. Press the Burst of Steam Button
once.
7. Steam will penetrate into the gar-
ment removing the wrinkles.
8. For Stubborn wrinkles, wait a few
seconds before pressing the Burst
Of Steam Button again.
9. Most wrinkles can be removed
within three presses.
Note: It may be necessary to press
the burst of steam button a few
times to start this function.
For optimum steam quality, do not
operate the Burst Of Steam more
than three times in succession.
Build-in Anti-scale System
The build-in anti-scale cartridge is
designed to reduce the build-up of
limescale which occurs during steam
ironing. This will prolonge the work-
ing life of your iron.
Note: The anti-scale cartridge will
not completely stop the natural
process of limescale build-up.
Self-Cleaning
This function removes the scales
and minerals built up in the Steam
Chamber. The iron will remain in
the best condition if this function is
performed at least once a month
or more regularly depending on the
hardness of the water used.
1. Fill the iron as described in How
To Fill Water; fill the water tank up
to half.
2. Place the iron on a surface in
upright standing position.
3. Connect to a mains supply outlet.
4. Turn the Temperature Dial in
clockwise direction to ‘Max’ setting.
5. Pilot light glows indicating the iron
is switched on.
6. Pilot light goes off when the re-
quired temperature is reached.
7. Wait for one more cycle; pilot light
glows and goes off.
8. Turn the Temperature Dial in anti-
clockwise direction to ‘Min’.
9. Disconnect the iron from mains
supply outlet.
10. Hold the iron horizontally over
a sink.
11. Pull and hold the Steam Control/
Self-Cleaning Knob to (Descaling)
position.
12. Steam and boiling hot water will
drain from the holes on the soleplate
washing away the scales and
minerals that have built up inside the
Steam Chamber.
13. Gently move the iron back and